PROCESS:

Electron Beam Imaging, Cold Pressure Fusing

TONERS:

Fusible, Duplex and MICR Dry Toner

SPEED:

70 to 225 FPM

PAPER PATH:

Continuous web, horizontal

RESOLUTION:

240 DPI and 300 DPI
Determined by Job Software

PRINT WIDTH:

8.5 inches (215.9 mm)

REGISTRATION

Photoeye detection of cue mark on pre-printed web or machine sync
Vertical and lateral image position
adjustable while running +/- 1/32^nd inch (0.8 mm)

WEB WIDTH:

4 inches to 10.5 inches (102 mm to 267 mm)

SUBSTRATES:

12 lb. to 110 lb. bond paper, vellum, various pressure sensitive labels, foil clad,    vinyl coated, synthetic papers, many other materials

DIAGNOSTICS:

Power up self test, fault monitoring and reporting while running, off-line RIP diagnostics
Power Supply breakout terminals permit operator to check voltages while running.

ENVIRONMENTAL:

59 to 82 degrees F, 15 to 28 degrees C
35 to 65% Relative Humidity, Non-Condensing

POWER:

120 VAC, 60 Hz, 20 Amp Conditioned Power
Optional: 220 VAC, 50 Hz, 15 Amp Conditioned Power
Optional: 100 VAC, 50 Hz, 20 Amp Conditioned Power

AIR:

1 CFM @ 90 PSI, Clean Dry Air

DIMENSIONS:

Length Height Width   (inches) (cm) (inches) (cm) (inches) (cm) Engine 26.75 67.95 55.52 141.02 22.52 57.20 Electronics Cabinet 21.25 53.98 26.35 66.93 16.53 42.00